Product Detail
Product name: China Manufacturer Wholesale Tungsten Carbide Pin For Scriber Pens
Customized support: OEM and ODM
Material: 100% Virgin Tungsten Carbide
Grade: K10 / K15 / K20 / K30, etc.
Size: Standrad or Customer's Request
Angle for cutting: 30°, 45°, 60°, 90°, 120°
Surface: Blanks or polished grinding
Product Application
1. As scriber tips, they are assembling on tool bit for engraving or scribing on very hard items, like aluminum, brass, bronze, metals, steel, glass, ceramics, hardwood, plastics, concrete and so on.
2. As glass breaker, they're designed for breaking glass or hard surface when emergency.
3. As Bush Hammer carbide tips, they're mounted on an 11-inch or 9-inch plate, to be run under a concrete floor grinder. The tool is designed to break down difficult coatings, and leaves a textured surface to promoted bonding of future coatings or overlays.
Product Specifications
Please check our molds as below.
For other sizes, we can also do custom design, it according to clients’ requirements or drawings.
Item No | D | L | α |
1 | 1.5 | 8 | 30°/45°/60°/90° |
2 | 2 | 10 | 30°/45°/60°/90° |
3 | 2.5 | 20 | 30°/45°/60°/90° |
4 | 3 | 15 | 30°/45°/60°/90° |
5 | 4 | 14 | 30°/45°/60°/90° |
6 | 5 | 18 | 30°/45°/60°/90° |
7 | 6 | 20 | 30°/45°/60°/90° |
8 | 7 | 20 | 30°/45°/60°/90° |
9 | 8 | 22 | 30°/45°/60°/90° |
10 | 10 | 26 | 30°/45°/60°/90° |
Recommended Grade
Grade | Density | T.R.S | Hardness | Performance & Application Recommended |
g/cm3 | N/mm⊃2; | HRA | ||
YG6 | 90 | ≥3000 | 14.9 | Good wear resistance,used for hard wood, used for processing original wood,aluminum section bar, brass rod and cast iron. |
YG6X | 91.5 | ≥3500 | 14.9 | Has wear resistance higher than YG6,used for processing hard wood,original wood,aluminum section bar,brass rod and cast iron. |
YG8 | 89.5 | ≥3200 | 14.7 | Wear and percussion resistance,used for processing hard wood,soft wood,ferrous and non-ferrous. |
YG10X | 90 | ≥3650 | 14.4 | Wear resistance and strength comparatively higher,suitable for processing cast iron,non-ferrous,metal and non-metallid materials. |
Production Process
About Us
Please leave message and we will get back to you ASAP!
Wechat : mayyang789